Skip to content
Fault code dictionary (DTC)

P037A — Glow plug indicator control circuit: low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe engine computer found that the circuit controlling the glow plug (preheating) indicator has a signal that is too low. The problem concerns the dashboard indicator and its circuit, not necessarily the glow plugs themselves. This code is found on diesel engines; exact behavior can vary between manufacturers.
FamilyPowertrain (P)

Typical symptoms

Glow plug light that doesn't come on or stays off
Glow plug light always on
Check engine light on
Longer cold starts
White smoke on cold start

Common causes

Indicator control wire shorted to ground
Damaged connector or wiring
Faulty bulb or LED in the indicator
Faulty instrument cluster
Faulty preheating or engine control unit

What to do

Check the wiring and connectors of the indicator circuit and use a diagnostic tool to confirm the glow plugs are working normally. It is usually not urgent, but difficult cold starting should be checked.

How to read code P037A

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P037A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (3) points to ignition system or misfire, and the last two (7A) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P037A mean?

Glow plug indicator control circuit: low. The engine computer found that the circuit controlling the glow plug (preheating) indicator has a signal that is too low. The problem concerns the dashboard indicator and its circuit, not necessarily the glow plugs themselves. This code is found on diesel engines; exact behavior can vary between manufacturers.

Can I keep driving with code P037A active?

With caution: limp mode possible, have it checked soon

Common causes — P037A

Indicator control wire shorted to ground Damaged connector or wiring Faulty bulb or LED in the indicator Faulty instrument cluster Faulty preheating or engine control unit

How do you fix code P037A?

Check the wiring and connectors of the indicator circuit and use a diagnostic tool to confirm the glow plugs are working normally. It is usually not urgent, but difficult cold starting should be checked.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes