Skip to content
Fault code dictionary (DTC)

P0B05 — Electric transmission fluid pump: phase V current too high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit measured too much current on phase V of the electric transmission fluid pump motor. Excess current can mean a short circuit or a pump struggling to turn. The system may switch the pump off to avoid damage.
FamilyPowertrain (P)

Typical symptoms

Warning light on
Pump stopping or going into protection
Transmission engaging poorly or late
Noise or vibration from the pump
Limp mode

Common causes

Pump seized or stiff from wear
Short circuit in the wiring or winding
Very dirty or too thick transmission fluid
Faulty drive circuit
Problem in the control unit

What to do

Have the transmission fluid, the pump's freedom to turn and the wiring checked. Don't keep using the car if driving becomes uneven.

How to read code P0B05

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0B05 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (05) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0B05 mean?

Electric transmission fluid pump: phase V current too high. The control unit measured too much current on phase V of the electric transmission fluid pump motor. Excess current can mean a short circuit or a pump struggling to turn. The system may switch the pump off to avoid damage.

Can I keep driving with code P0B05 active?

With caution: limp mode possible, have it checked soon

Common causes — P0B05

Pump seized or stiff from wear Short circuit in the wiring or winding Very dirty or too thick transmission fluid Faulty drive circuit Problem in the control unit

How do you fix code P0B05?

Have the transmission fluid, the pump's freedom to turn and the wiring checked. Don't keep using the car if driving becomes uneven.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes