P0B09 — Electric transmission fluid pump A: motor supply circuit open
| Meaning | The control unit found an open circuit, or a problem, in the power supply to electric transmission fluid pump A's motor. Without power the pump doesn't turn, and oil pressure can be missing when the combustion engine is off. |
| Family | Powertrain (P) |
Typical symptoms
Transmission engaging late after a stop
Jerking on restart
Pump silent, not heard starting
Limp mode
Common causes
Broken wire or disconnected connector
Corroded contacts on the supply
Faulty pump drive circuit
Problem in the control unit
What to do
How to read code P0B09
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0B09 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (09) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0B09 mean?
Electric transmission fluid pump A: motor supply circuit open. The control unit found an open circuit, or a problem, in the power supply to electric transmission fluid pump A's motor. Without power the pump doesn't turn, and oil pressure can be missing when the combustion engine is off.
Can I keep driving with code P0B09 active?
With caution: limp mode possible, have it checked soon
Common causes — P0B09
Faulty fuse or relay in the pump's power supply Broken wire or disconnected connector Corroded contacts on the supply Faulty pump drive circuit Problem in the control unit
How do you fix code P0B09?
Check the fuse, relay and connector of the pump's power supply first, as they are the simplest to verify. If the car engages poorly after stops, limit use and have it examined.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0B08 — Electric transmission fluid pump: phase W current...
- Next code: P0B0A — Auxiliary transmission fluid pump A: supply voltag...
Related codes
- P0B00 — Electric transmission fluid pump: phase U current fault
- P0B01 — Electric transmission fluid pump: phase U current too low
- P0B02 — Electric transmission fluid pump: phase U current too high
- P0B03 — Electric transmission fluid pump: phase V current fault
- P0B04 — Electric transmission fluid pump: phase V current too low
- P0B05 — Electric transmission fluid pump: phase V current too high
- P0B06 — Electric transmission fluid pump: phase W current fault
- P0B07 — Electric transmission fluid pump: phase W current too low
- P0B08 — Electric transmission fluid pump: phase W current too high
- P0B0A — Auxiliary transmission fluid pump A: supply voltage too low
- P0B0B — Auxiliary transmission fluid pump A: supply voltage too high
- P0B0C — Auxiliary transmission fluid pump A: hydraulic leakage