P0B07 — Electric transmission fluid pump: phase W current too low
| Meaning | The control unit measured too little current on phase W of the electric transmission fluid pump motor. The pump may not be getting enough current to turn as it should. This can reduce oil pressure when the combustion engine is off. |
| Family | Powertrain (P) |
Typical symptoms
Delayed gear engagement after a stop
Jerking on restart
Pump can't be heard running
Limp mode
Common causes
Corroded or loose connector
Damaged pump motor winding
Faulty drive circuit
Problem in the control unit
What to do
How to read code P0B07
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0B07 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (07) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0B07 mean?
Electric transmission fluid pump: phase W current too low. The control unit measured too little current on phase W of the electric transmission fluid pump motor. The pump may not be getting enough current to turn as it should. This can reduce oil pressure when the combustion engine is off.
Can I keep driving with code P0B07 active?
With caution: limp mode possible, have it checked soon
Common causes — P0B07
Open circuit or broken wiring on phase W Corroded or loose connector Damaged pump motor winding Faulty drive circuit Problem in the control unit
How do you fix code P0B07?
Have the wiring, connector and continuity of phase W checked. Avoid driving for long with a transmission that engages poorly.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0B06 — Electric transmission fluid pump: phase W current...
- Next code: P0B08 — Electric transmission fluid pump: phase W current...
Related codes
- P0B00 — Electric transmission fluid pump: phase U current fault
- P0B01 — Electric transmission fluid pump: phase U current too low
- P0B02 — Electric transmission fluid pump: phase U current too high
- P0B03 — Electric transmission fluid pump: phase V current fault
- P0B04 — Electric transmission fluid pump: phase V current too low
- P0B05 — Electric transmission fluid pump: phase V current too high
- P0B06 — Electric transmission fluid pump: phase W current fault
- P0B08 — Electric transmission fluid pump: phase W current too high
- P0B09 — Electric transmission fluid pump A: motor supply circuit ope...
- P0B0A — Auxiliary transmission fluid pump A: supply voltage too low
- P0B0B — Auxiliary transmission fluid pump A: supply voltage too high
- P0B0C — Auxiliary transmission fluid pump A: hydraulic leakage