Skip to content
Fault code dictionary (DTC)

P0B17 — Battery voltage sense B: signal too high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit is seeing a higher than normal signal from measuring circuit B of the high-voltage battery voltage. It may come from a short to supply, a faulty measuring module or a reference problem. The reading is not reliable and the system may limit the battery.
FamilyPowertrain (P)

Typical symptoms

Hybrid/EV warning light on
Charge gauge wrong or erratic
Reduced electric range
Limited power when accelerating
Car in protection mode

Common causes

Measuring wire shorted to supply
Faulty pack measuring module
Damaged or damp connector
Problem with the circuit reference or ground
Fault in the battery management control unit

What to do

Have the circuit wiring, connector and supply checked by a technician qualified for high voltage. Avoid pushing on with use if power is reduced.

How to read code P0B17

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0B17 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (17) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0B17 mean?

Battery voltage sense B: signal too high. The control unit is seeing a higher than normal signal from measuring circuit B of the high-voltage battery voltage. It may come from a short to supply, a faulty measuring module or a reference problem. The reading is not reliable and the system may limit the battery.

Can I keep driving with code P0B17 active?

With caution: limp mode possible, have it checked soon

Common causes — P0B17

Measuring wire shorted to supply Faulty pack measuring module Damaged or damp connector Problem with the circuit reference or ground Fault in the battery management control unit

How do you fix code P0B17?

Have the circuit wiring, connector and supply checked by a technician qualified for high voltage. Avoid pushing on with use if power is reduced.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes