P0B19 — Hybrid/EV battery voltage sense C: circuit fault
| Meaning | The control unit has detected a fault in the circuit that measures voltage C of the high-voltage battery. Without a reliable reading the system knows the state of charge poorly and may limit battery use. The code is standard, but the exact measuring point called C depends on the manufacturer and I cannot specify it without knowing the make. |
| Family | Powertrain (P) |
Typical symptoms
Charge gauge inaccurate or unstable
Reduced electric range
Limited power
Charging not completed or interrupted
Common causes
Voltage sensing wiring broken or shorted
Faulty battery management control unit
Problem in the battery pack measuring module
Wiring damage after impacts or battery work
What to do
How to read code P0B19
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0B19 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (19) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0B19 mean?
Hybrid/EV battery voltage sense C: circuit fault. The control unit has detected a fault in the circuit that measures voltage C of the high-voltage battery. Without a reliable reading the system knows the state of charge poorly and may limit battery use. The code is standard, but the exact measuring point called C depends on the manufacturer and I cannot specify it without knowing the make.
Can I keep driving with code P0B19 active?
With caution: limp mode possible, have it checked soon
Common causes — P0B19
Measuring circuit connector corroded or loose Voltage sensing wiring broken or shorted Faulty battery management control unit Problem in the battery pack measuring module Wiring damage after impacts or battery work
How do you fix code P0B19?
The circuit must be checked by staff qualified for high-voltage work: do not touch the orange cables or connectors. If the car goes into protection mode, avoid using it for long.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0B18 — Battery voltage sense B: intermittent signal
- Next code: P0B1A — Battery voltage sense C: reading not plausible
Related codes
- P0B00 — Electric transmission fluid pump: phase U current fault
- P0B01 — Electric transmission fluid pump: phase U current too low
- P0B02 — Electric transmission fluid pump: phase U current too high
- P0B03 — Electric transmission fluid pump: phase V current fault
- P0B04 — Electric transmission fluid pump: phase V current too low
- P0B05 — Electric transmission fluid pump: phase V current too high
- P0B06 — Electric transmission fluid pump: phase W current fault
- P0B07 — Electric transmission fluid pump: phase W current too low
- P0B08 — Electric transmission fluid pump: phase W current too high
- P0B09 — Electric transmission fluid pump A: motor supply circuit ope...
- P0B0A — Auxiliary transmission fluid pump A: supply voltage too low
- P0B0B — Auxiliary transmission fluid pump A: supply voltage too high