P0B1B — Battery voltage sense C: signal too low
| Meaning | The control unit is seeing a lower than normal signal from measuring circuit C of the high-voltage battery voltage. It usually points to a broken wire, a short to ground or a measuring module that is not responding. The reading is not reliable. |
| Family | Powertrain (P) |
Typical symptoms
Charge gauge wrong
Reduced electric range
Limited power or car in protection mode
Charging limited or not possible
Common causes
Corroded connector or loose terminal
Missing supply to the measuring circuit
Faulty pack measuring module
Fault in the battery management control unit
What to do
How to read code P0B1B
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0B1B starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (1B) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0B1B mean?
Battery voltage sense C: signal too low. The control unit is seeing a lower than normal signal from measuring circuit C of the high-voltage battery voltage. It usually points to a broken wire, a short to ground or a measuring module that is not responding. The reading is not reliable.
Can I keep driving with code P0B1B active?
With caution: limp mode possible, have it checked soon
Common causes — P0B1B
Measuring wire broken or shorted to ground Corroded connector or loose terminal Missing supply to the measuring circuit Faulty pack measuring module Fault in the battery management control unit
How do you fix code P0B1B?
Wiring, connectors and supply of the circuit must be checked by a technician qualified for high voltage. Do not work on it yourself. With limited power, use the car as little as possible.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0B1A — Battery voltage sense C: reading not plausible
- Next code: P0B1C — Battery voltage sense C: signal too high
Related codes
- P0B00 — Electric transmission fluid pump: phase U current fault
- P0B01 — Electric transmission fluid pump: phase U current too low
- P0B02 — Electric transmission fluid pump: phase U current too high
- P0B03 — Electric transmission fluid pump: phase V current fault
- P0B04 — Electric transmission fluid pump: phase V current too low
- P0B05 — Electric transmission fluid pump: phase V current too high
- P0B06 — Electric transmission fluid pump: phase W current fault
- P0B07 — Electric transmission fluid pump: phase W current too low
- P0B08 — Electric transmission fluid pump: phase W current too high
- P0B09 — Electric transmission fluid pump A: motor supply circuit ope...
- P0B0A — Auxiliary transmission fluid pump A: supply voltage too low
- P0B0B — Auxiliary transmission fluid pump A: supply voltage too high