P0B1D — Battery voltage sense C: intermittent signal
| Meaning | The signal from measuring circuit C of the high-voltage battery voltage is sometimes correct and sometimes jumps or disappears. It usually comes from a contact that opens and closes with vibration or temperature. The fault may come and go, but the cause is still there. |
| Family | Powertrain (P) |
Typical symptoms
Charge gauge jumping
Occasional loss of power
Variable electric range
Charging stopping for no obvious reason
Common causes
Measuring wiring with a partly broken wire
Moisture or corrosion in the terminals
Measuring module working only at times
Intermittent problem in the battery control unit
What to do
How to read code P0B1D
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0B1D starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (1D) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0B1D mean?
Battery voltage sense C: intermittent signal. The signal from measuring circuit C of the high-voltage battery voltage is sometimes correct and sometimes jumps or disappears. It usually comes from a contact that opens and closes with vibration or temperature. The fault may come and go, but the cause is still there.
Can I keep driving with code P0B1D active?
With caution: limp mode possible, have it checked soon
Common causes — P0B1D
Connector with unstable contact Measuring wiring with a partly broken wire Moisture or corrosion in the terminals Measuring module working only at times Intermittent problem in the battery control unit
How do you fix code P0B1D?
Tell the technician when the problem appears, for example on rough roads or in the cold: it helps to find it. The check is for staff qualified for high voltage. Don't wait for the fault to become permanent.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0B1C — Battery voltage sense C: signal too high
- Next code: P0B1E — Battery pack voltage sense circuit D fault
Related codes
- P0B00 — Electric transmission fluid pump: phase U current fault
- P0B01 — Electric transmission fluid pump: phase U current too low
- P0B02 — Electric transmission fluid pump: phase U current too high
- P0B03 — Electric transmission fluid pump: phase V current fault
- P0B04 — Electric transmission fluid pump: phase V current too low
- P0B05 — Electric transmission fluid pump: phase V current too high
- P0B06 — Electric transmission fluid pump: phase W current fault
- P0B07 — Electric transmission fluid pump: phase W current too low
- P0B08 — Electric transmission fluid pump: phase W current too high
- P0B09 — Electric transmission fluid pump A: motor supply circuit ope...
- P0B0A — Auxiliary transmission fluid pump A: supply voltage too low
- P0B0B — Auxiliary transmission fluid pump A: supply voltage too high