Skip to content
Fault code dictionary (DTC)

P0B25 — Hybrid/EV battery section A voltage too low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe controller measured a voltage for section A below the allowed minimum. It may be a real discharge or a weak cell group, or a measurement error. The exact meaning of A varies with the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Hybrid/EV warning light on
Low power
Electric range greatly reduced
The car will not go to Ready
Combustion engine always running

Common causes

Cell group discharged or degraded
Car left standing a long time with a very low battery
Poor contact or damaged wiring
Faulty measurement sensor
Imbalance between pack sections

What to do

Do not force repeated start attempts. Have qualified staff check the real voltage and the pack condition. A deeply discharged battery must be handled as the manufacturer prescribes, not by improvising.

How to read code P0B25

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0B25 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (25) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0B25 mean?

Hybrid/EV battery section A voltage too low. The controller measured a voltage for section A below the allowed minimum. It may be a real discharge or a weak cell group, or a measurement error. The exact meaning of A varies with the manufacturer.

Can I keep driving with code P0B25 active?

With caution: limp mode possible, have it checked soon

Common causes — P0B25

Cell group discharged or degraded Car left standing a long time with a very low battery Poor contact or damaged wiring Faulty measurement sensor Imbalance between pack sections

How do you fix code P0B25?

Do not force repeated start attempts. Have qualified staff check the real voltage and the pack condition. A deeply discharged battery must be handled as the manufacturer prescribes, not by improvising.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes