P0B3C — Hybrid/EV battery voltage sense A circuit range/performance
| Meaning | The control unit receives from the battery voltage sense A circuit a value outside the expected limits, or one that does not match other data. Sense A is defined by the manufacturer. The value may be wrong because of a measurement fault, not necessarily because the battery is in poor condition. |
| Family | Powertrain (P) |
Typical symptoms
Inconsistent charge gauge
Limited power or charging
Electric range changing in odd ways
Problem that appears now and then
Common causes
Connections with abnormal resistance
Imbalance between pack cells
Damaged sensor wiring
Fault in the battery management unit
What to do
How to read code P0B3C
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0B3C starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (3C) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0B3C mean?
Hybrid/EV battery voltage sense A circuit range/performance. The control unit receives from the battery voltage sense A circuit a value outside the expected limits, or one that does not match other data. Sense A is defined by the manufacturer. The value may be wrong because of a measurement fault, not necessarily because the battery is in poor condition.
Can I keep driving with code P0B3C active?
With caution: limp mode possible, have it checked soon
Common causes — P0B3C
Sensor or measuring board out of calibration Connections with abnormal resistance Imbalance between pack cells Damaged sensor wiring Fault in the battery management unit
How do you fix code P0B3C?
Have the technician compare the voltage read by the sensor with the actual pack voltage, to tell whether the fault is in measurement or in the battery. Check connectors and wiring. Do not touch high-voltage parts yourself.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0B3B — Hybrid/EV battery voltage sense A circuit fault
- Next code: P0B3D — Hybrid/EV battery voltage sense A circuit low
Related codes
- P0B00 — Electric transmission fluid pump: phase U current fault
- P0B01 — Electric transmission fluid pump: phase U current too low
- P0B02 — Electric transmission fluid pump: phase U current too high
- P0B03 — Electric transmission fluid pump: phase V current fault
- P0B04 — Electric transmission fluid pump: phase V current too low
- P0B05 — Electric transmission fluid pump: phase V current too high
- P0B06 — Electric transmission fluid pump: phase W current fault
- P0B07 — Electric transmission fluid pump: phase W current too low
- P0B08 — Electric transmission fluid pump: phase W current too high
- P0B09 — Electric transmission fluid pump A: motor supply circuit ope...
- P0B0A — Auxiliary transmission fluid pump A: supply voltage too low
- P0B0B — Auxiliary transmission fluid pump A: supply voltage too high