P0B42 — Hybrid/EV battery voltage sense B circuit low
| Meaning | The control unit reads a lower than normal signal on the battery voltage sense B circuit. It may come from a short to ground, a damaged wire or a truly low voltage. Sense B is defined by the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power
Charge gauge showing low or odd values
Limited charging
Car will not enter Ready
Common causes
Wet or corroded connector
Faulty sensor or measuring board
Genuinely low voltage in one battery section
Fault in the battery management unit
What to do
How to read code P0B42
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0B42 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (42) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0B42 mean?
Hybrid/EV battery voltage sense B circuit low. The control unit reads a lower than normal signal on the battery voltage sense B circuit. It may come from a short to ground, a damaged wire or a truly low voltage. Sense B is defined by the manufacturer.
Can I keep driving with code P0B42 active?
With caution: limp mode possible, have it checked soon
Common causes — P0B42
Sensor wire touching ground Wet or corroded connector Faulty sensor or measuring board Genuinely low voltage in one battery section Fault in the battery management unit
How do you fix code P0B42?
Have the sensor wiring and connectors checked, then the reading compared with the real pack voltage. Do not work on high-voltage parts yourself. It is best not to use the car for long with the fault active.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0B41 — Hybrid/EV battery voltage sense B circuit range/pe...
- Next code: P0B43 — Hybrid/EV battery voltage sense B circuit high
Related codes
- P0B00 — Electric transmission fluid pump: phase U current fault
- P0B01 — Electric transmission fluid pump: phase U current too low
- P0B02 — Electric transmission fluid pump: phase U current too high
- P0B03 — Electric transmission fluid pump: phase V current fault
- P0B04 — Electric transmission fluid pump: phase V current too low
- P0B05 — Electric transmission fluid pump: phase V current too high
- P0B06 — Electric transmission fluid pump: phase W current fault
- P0B07 — Electric transmission fluid pump: phase W current too low
- P0B08 — Electric transmission fluid pump: phase W current too high
- P0B09 — Electric transmission fluid pump A: motor supply circuit ope...
- P0B0A — Auxiliary transmission fluid pump A: supply voltage too low
- P0B0B — Auxiliary transmission fluid pump A: supply voltage too high