P0B73 — HV battery voltage sense circuit L: reading not plausible
| Meaning | The control unit found that the signal from measurement circuit "L" does not match what it expects or what similar circuits report. The signal is present, but the values do not add up. Which cell group L corresponds to depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Hard-to-believe charge level indication
Reduced power or limp mode
Combustion engine running more often than usual
System will not start in more serious cases
Common causes
Measurement wiring with abnormal resistance
Cell group that is genuinely unbalanced
Faulty battery pack control electronics
Moisture or corrosion inside the battery
What to do
How to read code P0B73
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0B73 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (73) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0B73 mean?
HV battery voltage sense circuit L: reading not plausible. The control unit found that the signal from measurement circuit "L" does not match what it expects or what similar circuits report. The signal is present, but the values do not add up. Which cell group L corresponds to depends on the manufacturer.
Can I keep driving with code P0B73 active?
With caution: limp mode possible, have it checked soon
Common causes — P0B73
Oxidized or loose measurement connector or terminal Measurement wiring with abnormal resistance Cell group that is genuinely unbalanced Faulty battery pack control electronics Moisture or corrosion inside the battery
How do you fix code P0B73?
Have the voltages read for each cell group compared with the real ones, to tell a measurement error from a cell problem. Do not open or touch the battery pack: it requires trained staff. Do not postpone for long.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0B72 — HV battery voltage sense circuit L: circuit fault
- Next code: P0B74 — HV battery voltage sense circuit L: signal too low
Related codes
- P0B00 — Electric transmission fluid pump: phase U current fault
- P0B01 — Electric transmission fluid pump: phase U current too low
- P0B02 — Electric transmission fluid pump: phase U current too high
- P0B03 — Electric transmission fluid pump: phase V current fault
- P0B04 — Electric transmission fluid pump: phase V current too low
- P0B05 — Electric transmission fluid pump: phase V current too high
- P0B06 — Electric transmission fluid pump: phase W current fault
- P0B07 — Electric transmission fluid pump: phase W current too low
- P0B08 — Electric transmission fluid pump: phase W current too high
- P0B09 — Electric transmission fluid pump A: motor supply circuit ope...
- P0B0A — Auxiliary transmission fluid pump A: supply voltage too low
- P0B0B — Auxiliary transmission fluid pump A: supply voltage too high