P0B90 — HV battery voltage sensor 'R': circuit fault
| Meaning | The battery management controller detected a fault in the circuit that measures the voltage of one cell group of the traction battery, labelled R. The general code does not say whether the signal is low, high or erratic. The group tied to the letter R is decided by the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power or limp mode
Odd state-of-charge display
Combustion engine working more than usual
Hard or impossible drive-ready start
Common causes
Damaged sensing wire
Voltage imbalance between cells
Faulty battery controller
Moisture in the battery pack
What to do
How to read code P0B90
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0B90 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (90) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0B90 mean?
HV battery voltage sensor 'R': circuit fault. The battery management controller detected a fault in the circuit that measures the voltage of one cell group of the traction battery, labelled R. The general code does not say whether the signal is low, high or erratic. The group tied to the letter R is decided by the manufacturer.
Can I keep driving with code P0B90 active?
With caution: limp mode possible, have it checked soon
Common causes — P0B90
Corroded or loose sensing connector Damaged sensing wire Voltage imbalance between cells Faulty battery controller Moisture in the battery pack
How do you fix code P0B90?
Do not touch the orange cables or open the battery. Have the voltages of all cell groups and any other stored codes read with a scan tool. Don't wait long: the car may limit power or stop.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0B8F — HV battery voltage sensor 'Q': erratic signal
- Next code: P0B91 — HV battery voltage sensor 'R': implausible reading
Related codes
- P0B00 — Electric transmission fluid pump: phase U current fault
- P0B01 — Electric transmission fluid pump: phase U current too low
- P0B02 — Electric transmission fluid pump: phase U current too high
- P0B03 — Electric transmission fluid pump: phase V current fault
- P0B04 — Electric transmission fluid pump: phase V current too low
- P0B05 — Electric transmission fluid pump: phase V current too high
- P0B06 — Electric transmission fluid pump: phase W current fault
- P0B07 — Electric transmission fluid pump: phase W current too low
- P0B08 — Electric transmission fluid pump: phase W current too high
- P0B09 — Electric transmission fluid pump A: motor supply circuit ope...
- P0B0A — Auxiliary transmission fluid pump A: supply voltage too low
- P0B0B — Auxiliary transmission fluid pump A: supply voltage too high