Skip to content
Fault code dictionary (DTC)

P0BC0 — Battery cooling fan supply voltage low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit measures a lower voltage than expected on the supply circuit of the battery cooling fan. The fan may run slowly or not at all, so the battery may not be cooled properly.
FamilyPowertrain (P)

Typical symptoms

Hybrid/electric system warning light on
Fan running slow or weak
Battery getting hotter than usual
Reduced power with a hot battery
Fan not starting

Common causes

Fan wiring or ground with high resistance or corrosion
Connector with dirty or loose contacts
Short to ground in the fan circuit
Failing fan motor drawing too much current
Weak or unstable 12 V supply
Faulty fan control unit

What to do

First check the 12 V battery, grounds and fan connectors. Have the circuit tested at a qualified workshop. Do not ignore this for long, because the cooling protects the battery.

How to read code P0BC0

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0BC0 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (C0) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0BC0 mean?

Battery cooling fan supply voltage low. The control unit measures a lower voltage than expected on the supply circuit of the battery cooling fan. The fan may run slowly or not at all, so the battery may not be cooled properly.

Can I keep driving with code P0BC0 active?

With caution: limp mode possible, have it checked soon

Common causes — P0BC0

Fan wiring or ground with high resistance or corrosion Connector with dirty or loose contacts Short to ground in the fan circuit Failing fan motor drawing too much current Weak or unstable 12 V supply Faulty fan control unit

How do you fix code P0BC0?

First check the 12 V battery, grounds and fan connectors. Have the circuit tested at a qualified workshop. Do not ignore this for long, because the cooling protects the battery.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes