Skip to content
Fault code dictionary (DTC)

P0BC4 — Battery temperature sensor E signal too low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit reads an electrical signal that is too low from battery temperature sensor E, typical of a short to ground or a failed sensor. The temperature reading is not reliable.
FamilyPowertrain (P)

Typical symptoms

Hybrid/electric system warning light on
Battery temperature read incorrectly
Battery fan running constantly or not starting
Reduced power
Limited charging

Common causes

Sensor wiring shorted to ground
Internal sensor short
Damaged or wet connector
Battery control unit with a faulty input
Wire insulation worn by rubbing

What to do

Have the sensor wiring and connector checked at a qualified workshop. Do not work on the battery pack yourself. Get it checked soon, because the control unit may limit power as a precaution.

How to read code P0BC4

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0BC4 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (C4) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0BC4 mean?

Battery temperature sensor E signal too low. The control unit reads an electrical signal that is too low from battery temperature sensor E, typical of a short to ground or a failed sensor. The temperature reading is not reliable.

Can I keep driving with code P0BC4 active?

With caution: limp mode possible, have it checked soon

Common causes — P0BC4

Sensor wiring shorted to ground Internal sensor short Damaged or wet connector Battery control unit with a faulty input Wire insulation worn by rubbing

How do you fix code P0BC4?

Have the sensor wiring and connector checked at a qualified workshop. Do not work on the battery pack yourself. Get it checked soon, because the control unit may limit power as a precaution.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes