P0BDC — Inverter temperature sensor E: signal out of range
| Meaning | The control unit read a value from inverter temperature sensor E that does not match the other temperatures or the driving conditions. The inverter is the module that converts battery current into the current the motor uses. The signal is not necessarily open or shorted: it is simply not believable. The location of sensor E depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power when accelerating
Warning message on the instrument cluster
Inverter cooling fans or pump more active than usual
Vehicle in limp mode with limited performance
Common causes
Poor contact in the sensor or inverter connector
Damaged or corroded wiring
Insufficient inverter cooling (low coolant, air in the circuit, weak pump)
Internal fault in the inverter or its control board
What to do
How to read code P0BDC
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0BDC starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (DC) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0BDC mean?
Inverter temperature sensor E: signal out of range. The control unit read a value from inverter temperature sensor E that does not match the other temperatures or the driving conditions. The inverter is the module that converts battery current into the current the motor uses. The signal is not necessarily open or shorted: it is simply not believable. The location of sensor E depends on the manufacturer.
Can I keep driving with code P0BDC active?
With caution: limp mode possible, have it checked soon
Common causes — P0BDC
Inverter temperature sensor drifting or reading inaccurately Poor contact in the sensor or inverter connector Damaged or corroded wiring Insufficient inverter cooling (low coolant, air in the circuit, weak pump) Internal fault in the inverter or its control board
How do you fix code P0BDC?
Have the live readings of all inverter temperature sensors read and compare them with each other on a cold vehicle: they should be very similar. Check the coolant level and condition and the state of the connectors. If power is reduced, avoid pushing the vehicle and have it checked soon by a workshop qualified for high-voltage systems.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0BDB — Inverter temperature sensor E circuit fault
- Next code: P0BDD — Inverter temperature sensor E: signal too low
Related codes
- P0B00 — Electric transmission fluid pump: phase U current fault
- P0B01 — Electric transmission fluid pump: phase U current too low
- P0B02 — Electric transmission fluid pump: phase U current too high
- P0B03 — Electric transmission fluid pump: phase V current fault
- P0B04 — Electric transmission fluid pump: phase V current too low
- P0B05 — Electric transmission fluid pump: phase V current too high
- P0B06 — Electric transmission fluid pump: phase W current fault
- P0B07 — Electric transmission fluid pump: phase W current too low
- P0B08 — Electric transmission fluid pump: phase W current too high
- P0B09 — Electric transmission fluid pump A: motor supply circuit ope...
- P0B0A — Auxiliary transmission fluid pump A: supply voltage too low
- P0B0B — Auxiliary transmission fluid pump A: supply voltage too high