Skip to content
Fault code dictionary (DTC)

P0BF1 — Drive motor B phase U current sensor circuit fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected a problem in the circuit of the sensor that measures current on phase U of traction motor B, the vehicle's second electric motor. The code is generic and does not say whether the signal is low or high. The cause lies among the sensor, wiring and inverter.
FamilyPowertrain (P)

Typical symptoms

Hybrid or electric system warning light on
Reduced power or drive
Uneven acceleration
Fault message on the dashboard
Car will not start or shuts down

Common causes

Corroded or loose sensor connector
Damaged motor B phase U wiring
Faulty phase U current sensor
Sensor supply or ground problem
Internal inverter fault

What to do

Have any companion codes and live data read to see whether the signal is missing, low or high, then check connectors and wiring. High voltage is for qualified staff only. If power drops, have the car checked soon.

How to read code P0BF1

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0BF1 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (F1) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0BF1 mean?

Drive motor B phase U current sensor circuit fault. The control unit detected a problem in the circuit of the sensor that measures current on phase U of traction motor B, the vehicle's second electric motor. The code is generic and does not say whether the signal is low or high. The cause lies among the sensor, wiring and inverter.

Can I keep driving with code P0BF1 active?

With caution: limp mode possible, have it checked soon

Common causes — P0BF1

Corroded or loose sensor connector Damaged motor B phase U wiring Faulty phase U current sensor Sensor supply or ground problem Internal inverter fault

How do you fix code P0BF1?

Have any companion codes and live data read to see whether the signal is missing, low or high, then check connectors and wiring. High voltage is for qualified staff only. If power drops, have the car checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes