Skip to content
Fault code dictionary (DTC)

P0BFE — Motor B current sensors: three phase readings disagree

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit compares the currents measured on phases U, V and W of drive motor B. The three readings should agree and they do not. At least one sensor, or its wiring, is giving a wrong value, but the code does not say which.
FamilyPowertrain (P)

Typical symptoms

Hybrid or electric system fault light
Reduced power or limp mode
Jerking or vibration in electric drive
Unusual noise from the motor or inverter
Warning message in the instrument cluster

Common causes

One of the U, V or W phase current sensors faulty
Unstable contact in connectors or wiring
Loose or damaged phase cable
Internal inverter fault
Motor B problem, such as a degraded winding

What to do

Go to a workshop qualified for high-voltage vehicles, which can compare the three phase currents live. Do not work on the orange cables. If driving becomes uneven, stop.

How to read code P0BFE

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0BFE starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (B) points to hybrid propulsion, and the last two (FE) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0BFE mean?

Motor B current sensors: three phase readings disagree. The control unit compares the currents measured on phases U, V and W of drive motor B. The three readings should agree and they do not. At least one sensor, or its wiring, is giving a wrong value, but the code does not say which.

Can I keep driving with code P0BFE active?

With caution: limp mode possible, have it checked soon

Common causes — P0BFE

One of the U, V or W phase current sensors faulty Unstable contact in connectors or wiring Loose or damaged phase cable Internal inverter fault Motor B problem, such as a degraded winding

How do you fix code P0BFE?

Go to a workshop qualified for high-voltage vehicles, which can compare the three phase currents live. Do not work on the orange cables. If driving becomes uneven, stop.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes