P0C03 — Drive motor B current too low
| Meaning | The control unit found that the current in drive motor B is lower than requested or expected. Either the motor is not getting the current it needs, or the reading is wrong. The exact meaning depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Weak acceleration
Electric drive missing or intermittent
Limp mode
Fault message in the instrument cluster
Common causes
Current sensor reading too low
Inverter fault
Motor B problem
Insufficient inverter supply
What to do
How to read code P0C03
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C03 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (03) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C03 mean?
Drive motor B current too low. The control unit found that the current in drive motor B is lower than requested or expected. Either the motor is not getting the current it needs, or the reading is wrong. The exact meaning depends on the manufacturer.
Can I keep driving with code P0C03 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C03
Broken phase cable or loose connection Current sensor reading too low Inverter fault Motor B problem Insufficient inverter supply
How do you fix code P0C03?
A workshop qualified for high voltage is needed to check connections and live data. Do not work on the orange cables yourself. Do not put it off, as the car may lose drive.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C02 — Drive motor B current fault
- Next code: P0C04 — Drive motor B current too high
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open
- P0C0C — Motor A inverter power supply voltage too low