P0C0B — Motor A inverter power supply circuit open
| Meaning | The control unit found that the supply circuit of the inverter driving drive motor A is open or not arriving correctly. Without supply, the inverter cannot drive the motor. The exact meaning, for example whether it concerns the high or low voltage side, depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
No electric drive
Car will not start or shuts down
Limp mode
Fault message in the instrument cluster
Common causes
Broken or loose supply cable or connector
Poor contact in connectors
Internal inverter fault
Low-voltage battery flat or in poor condition
What to do
How to read code P0C0B
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C0B starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (0B) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C0B mean?
Motor A inverter power supply circuit open. The control unit found that the supply circuit of the inverter driving drive motor A is open or not arriving correctly. Without supply, the inverter cannot drive the motor. The exact meaning, for example whether it concerns the high or low voltage side, depends on the manufacturer.
Can I keep driving with code P0C0B active?
With caution: limp mode possible, have it checked soon
Common causes — P0C0B
Fuse or relay in the inverter supply Broken or loose supply cable or connector Poor contact in connectors Internal inverter fault Low-voltage battery flat or in poor condition
How do you fix code P0C0B?
First check that the 12 V battery is in good condition, then rely on a workshop qualified for high voltage for fuses, connectors and inverter supply. Do not touch the orange cables.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C0A — Motor B phase U-V-W circuit high
- Next code: P0C0C — Motor A inverter power supply voltage too low
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0C — Motor A inverter power supply voltage too low