P0C09 — Motor B phase U-V-W circuit low
| Meaning | The control unit found too low a voltage in the circuit of phases U, V and W of drive motor B. It can point to a contact to ground or a fault in the inverter or motor. The exact meaning of the code depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power
Uneven electric drive
System shutdown
Fault message in the instrument cluster
Common causes
Inverter fault
Motor B winding leaking to ground
Wet or corroded connector
Faulty sensing sensor or wiring
What to do
How to read code P0C09
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C09 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (09) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C09 mean?
Motor B phase U-V-W circuit low. The control unit found too low a voltage in the circuit of phases U, V and W of drive motor B. It can point to a contact to ground or a fault in the inverter or motor. The exact meaning of the code depends on the manufacturer.
Can I keep driving with code P0C09 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C09
Phase cable with damaged insulation to ground Inverter fault Motor B winding leaking to ground Wet or corroded connector Faulty sensing sensor or wiring
How do you fix code P0C09?
Possibly compromised high-voltage insulation is a risk: do not touch the orange cables and go to a qualified workshop right away. They will check insulation, cables and inverter. Avoid using the car until it has been checked.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C08 — Motor B phase U-V-W circuit open
- Next code: P0C0A — Motor B phase U-V-W circuit high
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open
- P0C0C — Motor A inverter power supply voltage too low