P0C0A — Motor B phase U-V-W circuit high
| Meaning | The control unit found too high a voltage in the circuit of phases U, V and W of drive motor B. It can point to an abnormal contact with a supply voltage or a fault in the inverter or motor. The exact meaning depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Sudden power reduction
System shutdown
Jerky drive
Fault message in the instrument cluster
Common causes
Inverter fault
Damaged motor B winding
Damaged connector
Faulty sensing wiring
What to do
How to read code P0C0A
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C0A starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (0A) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C0A mean?
Motor B phase U-V-W circuit high. The control unit found too high a voltage in the circuit of phases U, V and W of drive motor B. It can point to an abnormal contact with a supply voltage or a fault in the inverter or motor. The exact meaning depends on the manufacturer.
Can I keep driving with code P0C0A active?
With caution: limp mode possible, have it checked soon
Common causes — P0C0A
Phase cable touching another voltage source Inverter fault Damaged motor B winding Damaged connector Faulty sensing wiring
How do you fix code P0C0A?
Do not touch the orange cables and go to a workshop qualified for high voltage. Cables, connectors and inverter are checked with suitable instruments. As a precaution, do not use the car until it has been checked.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C09 — Motor B phase U-V-W circuit low
- Next code: P0C0B — Motor A inverter power supply circuit open
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0B — Motor A inverter power supply circuit open
- P0C0C — Motor A inverter power supply voltage too low