Skip to content
Fault code dictionary (DTC)

P0C05 — Motor A phase U-V-W circuit open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit found that the circuit linking the inverter to phases U, V and W of drive motor A is open. Without a complete connection, the motor cannot get the current it needs to run smoothly. The code does not say which phase is affected.
FamilyPowertrain (P)

Typical symptoms

Hybrid or electric system warning light on
Electric drive missing or very weak
Jerking or vibration
Limp mode
Fault message in the instrument cluster

Common causes

Broken or disconnected phase cable
Loose bolt or connection terminal
Damaged power cable connector
Internal inverter fault
Open motor winding

What to do

Do not touch the orange cables: the check must be done by a workshop qualified for high voltage, starting with cables, terminals and phase continuity. Do not put it off: a loose connection can get worse and overheat.

How to read code P0C05

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0C05 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (05) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0C05 mean?

Motor A phase U-V-W circuit open. The control unit found that the circuit linking the inverter to phases U, V and W of drive motor A is open. Without a complete connection, the motor cannot get the current it needs to run smoothly. The code does not say which phase is affected.

Can I keep driving with code P0C05 active?

With caution: limp mode possible, have it checked soon

Common causes — P0C05

Broken or disconnected phase cable Loose bolt or connection terminal Damaged power cable connector Internal inverter fault Open motor winding

How do you fix code P0C05?

Do not touch the orange cables: the check must be done by a workshop qualified for high voltage, starting with cables, terminals and phase continuity. Do not put it off: a loose connection can get worse and overheat.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes