P0C0C — Motor A inverter power supply voltage too low
| Meaning | The control unit found that the supply voltage of the inverter for drive motor A is lower than the expected minimum. With low voltage the inverter can work badly or stop. The exact meaning, and whether it concerns the high or low voltage side, depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power
Intermittent electric drive
Sudden system shutdowns
Fault message in the instrument cluster
Common causes
Loose or corroded supply connections
Voltage drop on the high-voltage side due to traction battery problems
Fault in the inverter or its power supply
Damaged supply cable
What to do
How to read code P0C0C
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C0C starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (0C) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C0C mean?
Motor A inverter power supply voltage too low. The control unit found that the supply voltage of the inverter for drive motor A is lower than the expected minimum. With low voltage the inverter can work badly or stop. The exact meaning, and whether it concerns the high or low voltage side, depends on the manufacturer.
Can I keep driving with code P0C0C active?
With caution: limp mode possible, have it checked soon
Common causes — P0C0C
Weak low-voltage battery or corroded terminals Loose or corroded supply connections Voltage drop on the high-voltage side due to traction battery problems Fault in the inverter or its power supply Damaged supply cable
How do you fix code P0C0C?
Start by checking the 12 V battery and terminals, then have the inverter supply checked by a workshop qualified for high voltage. Do not touch the orange cables.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C0B — Motor A inverter power supply circuit open
- Next code: P0C0D — Motor A inverter power supply voltage too high
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open