P0C0E — Motor B inverter power supply circuit open
| Meaning | The hybrid or electric system control unit detected that the power supply to the inverter of electric motor B is interrupted or not arriving. The inverter converts the traction battery's current into the form that drives the motor. Which motor is B depends on the manufacturer and model. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power or limp mode
The vehicle cannot start in electric mode
The combustion engine works harder than usual
Warning messages on the dashboard
Common causes
Broken or damaged wiring
Faulty fuse or relay on the inverter supply
Internal inverter failure
Problem on the low-voltage supply line
What to do
How to read code P0C0E
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C0E starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (0E) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C0E mean?
Motor B inverter power supply circuit open. The hybrid or electric system control unit detected that the power supply to the inverter of electric motor B is interrupted or not arriving. The inverter converts the traction battery's current into the form that drives the motor. Which motor is B depends on the manufacturer and model.
Can I keep driving with code P0C0E active?
With caution: limp mode possible, have it checked soon
Common causes — P0C0E
Loose or corroded inverter power connector Broken or damaged wiring Faulty fuse or relay on the inverter supply Internal inverter failure Problem on the low-voltage supply line
How do you fix code P0C0E?
Have the car checked soon by a workshop equipped for hybrids or electric vehicles. Checks on these systems must be done only by qualified staff because of the high voltage. Never open or touch the orange cables yourself. If the car goes into limp mode, avoid pushing on with driving.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C0D — Motor A inverter power supply voltage too high
- Next code: P0C0F — Motor B inverter power supply voltage too low
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open