P0C14 — Motor B inverter phase U over temperature
| Meaning | The control unit detected excessive temperature in phase U of the inverter for electric motor B. Motor B is the system's second motor, and its role depends on the manufacturer. Beyond the temperature limit, power is reduced for protection. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power or regeneration
Cooling fans at maximum
Limp mode operation
Temperature warning on the dashboard
Common causes
Weak cooling pump
Dirty or blocked radiator
Temperature sensor reading incorrectly
Internal inverter failure
What to do
How to read code P0C14
This is a critical fault: vehicle safety or integrity may be compromised, so diagnosis should not be postponed.
The code P0C14 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (14) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C14 mean?
Motor B inverter phase U over temperature. The control unit detected excessive temperature in phase U of the inverter for electric motor B. Motor B is the system's second motor, and its role depends on the manufacturer. Beyond the temperature limit, power is reduced for protection.
Can I keep driving with code P0C14 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C14
Insufficient coolant or air in the circuit Weak cooling pump Dirty or blocked radiator Temperature sensor reading incorrectly Internal inverter failure
How do you fix code P0C14?
Have the inverter cooling checked at a workshop qualified for high-voltage vehicles. If a temperature warning appears, reduce the load and don't push on uphill or when towing.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C13 — Motor A inverter phase W over temperature
- Next code: P0C15 — Motor B inverter phase V over temperature
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open