P0C16 — Motor B inverter phase W over temperature
| Meaning | The control unit detected excessive temperature in phase W of the inverter for electric motor B. The system has a temperature limit to protect the power electronics: beyond it, power is reduced. |
| Family | Powertrain (P) |
Typical symptoms
Limited power
Cooling fans always running
The vehicle drops into reduced mode
Temperature warning on the dashboard
Common causes
Weak inverter cooling pump
Blocked radiator or air intakes
Faulty phase W temperature sensor
Internal inverter failure
What to do
How to read code P0C16
This is a critical fault: vehicle safety or integrity may be compromised, so diagnosis should not be postponed.
The code P0C16 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (16) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C16 mean?
Motor B inverter phase W over temperature. The control unit detected excessive temperature in phase W of the inverter for electric motor B. The system has a temperature limit to protect the power electronics: beyond it, power is reduced.
Can I keep driving with code P0C16 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C16
Low coolant or air in the circuit Weak inverter cooling pump Blocked radiator or air intakes Faulty phase W temperature sensor Internal inverter failure
How do you fix code P0C16?
Have the cooling circuit checked at a qualified workshop. If the warning appears often, don't underestimate it: repeated excess heat can damage the inverter.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C15 — Motor B inverter phase V over temperature
- Next code: P0C17 — Motor A position sensor not learned
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open