Skip to content
Fault code dictionary (DTC)

P0C3C — DC/DC converter: temperature sensor A unstable signal

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe signal from the DC/DC converter's temperature sensor 'A' reaches the control module on and off, with sudden jumps. The sensor or its wiring has a contact that works and then stops, so the fault may not be present when the car is at the shop.
FamilyPowertrain (P)

Typical symptoms

Hybrid or EV warning light on and off
Power dropping and then returning to normal
Fan starting and stopping for no reason
12 V battery sometimes charging poorly
Warnings that disappear after switching off and on again

Common causes

Connector with weak contact
Partly broken wire sensitive to vibration
Moisture in the connector
Temperature sensor failing intermittently
Converter with an intermittent internal defect

What to do

Note when the problem appears and tell the technician, who can look for the bad contact by moving the wiring while monitoring the car. Have someone qualified for high voltage check it soon: a fault that comes and goes can get worse.

How to read code P0C3C

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0C3C starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (3C) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0C3C mean?

DC/DC converter: temperature sensor A unstable signal. The signal from the DC/DC converter's temperature sensor 'A' reaches the control module on and off, with sudden jumps. The sensor or its wiring has a contact that works and then stops, so the fault may not be present when the car is at the shop.

Can I keep driving with code P0C3C active?

With caution: limp mode possible, have it checked soon

Common causes — P0C3C

Connector with weak contact Partly broken wire sensitive to vibration Moisture in the connector Temperature sensor failing intermittently Converter with an intermittent internal defect

How do you fix code P0C3C?

Note when the problem appears and tell the technician, who can look for the bad contact by moving the wiring while monitoring the car. Have someone qualified for high voltage check it soon: a fault that comes and goes can get worse.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes