P0C42 — Battery pack coolant temperature sensor A: circuit fault
| Meaning | The control module found an electrical problem in the circuit of sensor 'A', which measures the coolant temperature of the hybrid or EV battery pack. The code is generic and does not say whether it is a short or an open circuit. Without this measurement the module cannot manage battery cooling properly. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power
Cooling fan or pump working abnormally
Slower charging
Battery temperature warning on the display
Common causes
Damaged wiring
Faulty coolant temperature sensor
Moisture getting into the connector
Battery control module fault, rare
What to do
How to read code P0C42
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C42 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (42) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C42 mean?
Battery pack coolant temperature sensor A: circuit fault. The control module found an electrical problem in the circuit of sensor 'A', which measures the coolant temperature of the hybrid or EV battery pack. The code is generic and does not say whether it is a short or an open circuit. Without this measurement the module cannot manage battery cooling properly.
Can I keep driving with code P0C42 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C42
Corroded or loose sensor connector Damaged wiring Faulty coolant temperature sensor Moisture getting into the connector Battery control module fault, rare
How do you fix code P0C42?
Have a shop qualified for hybrid or electric vehicles check the circuit and sensor. Also check the battery coolant level when cold, but don't open the pack: it is high voltage.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C41 — DC/DC converter: temperature sensor B unstable sig...
- Next code: P0C43 — Battery pack coolant temperature sensor A: implaus...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open