Skip to content
Fault code dictionary (DTC)

P0C4F — Drive motor B: position exceeded learning limit

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit found that the rotor position of drive motor B, as measured by its sensor, is outside the limit within which the reference value can be learned. The sensor calibration falls outside the expected range. Without a reliable position the motor cannot be controlled accurately.
FamilyPowertrain (P)

Typical symptoms

Hybrid or EV system warning light on
Loss of power or reduced mode
Jerking or vibration while driving
Vehicle will not enter ready-to-drive mode
Unusual noise from the electric motor

Common causes

Position learning not performed after a repair
Motor B position sensor (resolver) shifted or faulty
Damaged sensor connector or wiring
Motor or rotor replaced without a new learning procedure
Faulty inverter or control unit

What to do

This code often appears after work on the motor or inverter, so mention any recent repairs. It needs diagnosis with a suitable tool to check the sensor and the learning procedure. If the car loses power, avoid using it.

How to read code P0C4F

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0C4F starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (4F) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0C4F mean?

Drive motor B: position exceeded learning limit. The control unit found that the rotor position of drive motor B, as measured by its sensor, is outside the limit within which the reference value can be learned. The sensor calibration falls outside the expected range. Without a reliable position the motor cannot be controlled accurately.

Can I keep driving with code P0C4F active?

With caution: limp mode possible, have it checked soon

Common causes — P0C4F

Position learning not performed after a repair Motor B position sensor (resolver) shifted or faulty Damaged sensor connector or wiring Motor or rotor replaced without a new learning procedure Faulty inverter or control unit

How do you fix code P0C4F?

This code often appears after work on the motor or inverter, so mention any recent repairs. It needs diagnosis with a suitable tool to check the sensor and the learning procedure. If the car loses power, avoid using it.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes