Skip to content
Fault code dictionary (DTC)

P0C6E — Battery temperature sensors A and B: readings do not agree

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe traction battery control unit compares the readings of temperature sensors A and B, which sit close together and should show similar values. It found a difference too large to be normal. Either one sensor is reading wrongly or there is a real temperature imbalance in the battery, and the unit cannot tell which reading is right.
FamilyPowertrain (P)

Typical symptoms

Hybrid or EV system warning light on
Limited power or slower charging
Battery cooling fan noisy or running all the time
Reduced electric range
Reduced-power mode in some cases

Common causes

Faulty or misreading temperature sensor
Damaged sensor connector or wiring
Insufficient cooling in one part of the battery pack
Dirty or blocked cooling fan or air ducts
Problem in the battery management unit

What to do

Have the battery cooling fan, air ducts and cooling filter checked first, then the sensors and their wiring. A wrongly read temperature can lead the system to manage the battery too cautiously or, worse, not cautiously enough, so do not ignore this code. Do not clear it without finding the cause.

How to read code P0C6E

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0C6E starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (6E) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0C6E mean?

Battery temperature sensors A and B: readings do not agree. The traction battery control unit compares the readings of temperature sensors A and B, which sit close together and should show similar values. It found a difference too large to be normal. Either one sensor is reading wrongly or there is a real temperature imbalance in the battery, and the unit cannot tell which reading is right.

Can I keep driving with code P0C6E active?

With caution: limp mode possible, have it checked soon

Common causes — P0C6E

Faulty or misreading temperature sensor Damaged sensor connector or wiring Insufficient cooling in one part of the battery pack Dirty or blocked cooling fan or air ducts Problem in the battery management unit

How do you fix code P0C6E?

Have the battery cooling fan, air ducts and cooling filter checked first, then the sensors and their wiring. A wrongly read temperature can lead the system to manage the battery too cautiously or, worse, not cautiously enough, so do not ignore this code. Do not clear it without finding the cause.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes