P0C80 — Battery temperature sensor G: intermittent signal
| Meaning | The signal from temperature sensor G appears and disappears, or jumps irregularly. The control unit sees it as a contact that breaks from time to time. The fault may show only with vibration, humidity or heat, which makes it hard to find. |
| Family | Powertrain (P) |
Typical symptoms
Occasional reduced power
Battery fan changing speed for no reason
Limited charging only at certain times
Fault disappearing and returning
Common causes
Partly broken or chafed wire
Sensor G with an unstable internal contact
Moisture in the connector
Ground or supply problem for the sensor
What to do
How to read code P0C80
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C80 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (80) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C80 mean?
Battery temperature sensor G: intermittent signal. The signal from temperature sensor G appears and disappears, or jumps irregularly. The control unit sees it as a contact that breaks from time to time. The fault may show only with vibration, humidity or heat, which makes it hard to find.
Can I keep driving with code P0C80 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C80
Loose or corroded connector of sensor G Partly broken or chafed wire Sensor G with an unstable internal contact Moisture in the connector Ground or supply problem for the sensor
How do you fix code P0C80?
Ask for a careful check of the connector and wiring of sensor G, moving them with the car off while watching the signal on a scan tool. An intermittent fault should not be ignored: when the sensor drops out, the battery loses its thermal protection. Have the car checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C7F — Battery temperature sensor G circuit: signal too h...
- Next code: P0C81 — Hybrid/EV battery temperature sensor H circuit fau...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open