Skip to content
Fault code dictionary (DTC)

P0C82 — Battery temperature sensor H: implausible reading

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe signal from temperature sensor H is present but the value is not believable: for example it stays fixed or differs greatly from neighboring sensors. The control unit does not trust the reading. Sensor H is a specific point in the battery that depends on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Hybrid/EV fault light on
Limited power or charging
Abnormal battery cooling fan behavior
Reduced electric range
No symptom besides the warning light

Common causes

Sensor H inaccurate or stuck
Sensor dislodged from its housing
Resistance in the connector contacts
Uneven battery cooling
Fault in the battery control unit

What to do

Use a scan tool to compare sensor H with the others on a cold vehicle: the values should be similar. If it is off, suspect the sensor or its connection first. Do not open the battery yourself: qualified personnel are needed.

How to read code P0C82

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0C82 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (82) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0C82 mean?

Battery temperature sensor H: implausible reading. The signal from temperature sensor H is present but the value is not believable: for example it stays fixed or differs greatly from neighboring sensors. The control unit does not trust the reading. Sensor H is a specific point in the battery that depends on the manufacturer.

Can I keep driving with code P0C82 active?

With caution: limp mode possible, have it checked soon

Common causes — P0C82

Sensor H inaccurate or stuck Sensor dislodged from its housing Resistance in the connector contacts Uneven battery cooling Fault in the battery control unit

How do you fix code P0C82?

Use a scan tool to compare sensor H with the others on a cold vehicle: the values should be similar. If it is off, suspect the sensor or its connection first. Do not open the battery yourself: qualified personnel are needed.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes