Skip to content
Fault code dictionary (DTC)

P0C8C — Hybrid Battery Pack Current Sensor Circuit Range/Performance

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit has detected an implausible signal coming from the current sensor inside the hybrid battery pack. This sensor measures how much electricity flows in and out of the high-voltage battery, and the system cannot accurately manage power flow when these readings do not make sense.
FamilyPowertrain (P)

Typical symptoms

The hybrid warning light or check engine light is on
The vehicle may limit power or enter a limp mode
Auto start-stop function may stop working

Common causes

Faulty hybrid battery current sensor
Loose, corroded, or damaged wiring harness or connector at the battery pack
Internal failure within the hybrid battery management system

What to do

Have a qualified technician inspect the high-voltage battery wiring and sensor connections as soon as possible. Because this involves the high-voltage system, proper safety precautions must be followed before touching any components.

How to read code P0C8C

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0C8C starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (8C) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0C8C mean?

Hybrid Battery Pack Current Sensor Circuit Range/Performance. The control unit has detected an implausible signal coming from the current sensor inside the hybrid battery pack. This sensor measures how much electricity flows in and out of the high-voltage battery, and the system cannot accurately manage power flow when these readings do not make sense.

Can I keep driving with code P0C8C active?

With caution: limp mode possible, have it checked soon

Common causes — P0C8C

Faulty hybrid battery current sensor Loose, corroded, or damaged wiring harness or connector at the battery pack Internal failure within the hybrid battery management system

How do you fix code P0C8C?

Have a qualified technician inspect the high-voltage battery wiring and sensor connections as soon as possible. Because this involves the high-voltage system, proper safety precautions must be followed before touching any components.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes