P0C94 — Hybrid Inverter Coolant Flow Pump Control Circuit Range/Performance
| Meaning | Your car's computer detected that the electric water pump responsible for cooling the hybrid system inverter is not performing as expected. This means the coolant flow might be restricted or the pump control signal is out of the normal operating range, which can lead to the inverter overheating. |
| Family | Powertrain (P) |
Typical symptoms
Hybrid system warning message
Potential limitation or shutdown of hybrid drive mode to prevent damage
Common causes
Air trapped in the hybrid cooling system
Electrical wiring or connector issue at the pump
Blown fuse related to the hybrid cooling system
What to do
How to read code P0C94
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0C94 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (94) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0C94 mean?
Hybrid Inverter Coolant Flow Pump Control Circuit Range/Performance. Your car's computer detected that the electric water pump responsible for cooling the hybrid system inverter is not performing as expected. This means the coolant flow might be restricted or the pump control signal is out of the normal operating range, which can lead to the inverter overheating.
Can I keep driving with code P0C94 active?
With caution: limp mode possible, have it checked soon
Common causes — P0C94
Failing auxiliary water pump for the inverter Air trapped in the hybrid cooling system Electrical wiring or connector issue at the pump Blown fuse related to the hybrid cooling system
How do you fix code P0C94?
You should have a technician check the operation and power supply of the inverter coolant pump as soon as possible. Avoid driving long distances if the hybrid system shows warnings of high temperature to prevent costly damage to the inverter.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0C93 — Anomalia Circuito Controllo Pressione Pompa Carbur...
- Next code: P0C95 — Hybrid battery auxiliary coolant pump system
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open