Skip to content
Fault code dictionary (DTC)

P0CBC — Drive motor A coolant temp sensor: circuit fault

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit found a general fault in the circuit of the sensor that measures coolant temperature for electric drive motor A. The code does not say whether the signal is too high, too low or unstable. Without this data the system does not know how hot the motor is and may limit power to be safe.
FamilyPowertrain (P)

Typical symptoms

Hybrid or EV system warning light on
Reduced power or limp mode
Abnormal or missing temperature gauge
Cooling fans or pump behaving unusually
Fault message on the dashboard

Common causes

Corroded or loose sensor connector
Damaged, broken or shorted wiring
Failed temperature sensor
Fault in the inverter or motor control unit
Coolant leak that damaged nearby connectors

What to do

Check the coolant level of the electric motor circuit, which is often separate from the combustion engine one, and have the codes read with a suitable tool. A technician will need to check the sensor and wiring. Don't keep driving for long with the light on: a motor that heats up unmonitored can be damaged. Only qualified personnel should work on high voltage.

How to read code P0CBC

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0CBC starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (BC) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0CBC mean?

Drive motor A coolant temp sensor: circuit fault. The control unit found a general fault in the circuit of the sensor that measures coolant temperature for electric drive motor A. The code does not say whether the signal is too high, too low or unstable. Without this data the system does not know how hot the motor is and may limit power to be safe.

Can I keep driving with code P0CBC active?

With caution: limp mode possible, have it checked soon

Common causes — P0CBC

Corroded or loose sensor connector Damaged, broken or shorted wiring Failed temperature sensor Fault in the inverter or motor control unit Coolant leak that damaged nearby connectors

How do you fix code P0CBC?

Check the coolant level of the electric motor circuit, which is often separate from the combustion engine one, and have the codes read with a suitable tool. A technician will need to check the sensor and wiring. Don't keep driving for long with the light on: a motor that heats up unmonitored can be damaged. Only qualified personnel should work on high voltage.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes