Skip to content
Fault code dictionary (DTC)

P0CC8 — Charge port door: open request switch circuit performance

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected that the signal from the charge port door open switch is not behaving as expected, for example changing too slowly or staying in an abnormal state. The electrical circuit is present, but the signal is not reliable. It may be due to the switch, a degraded contact or the control unit.
FamilyPowertrain (P)

Typical symptoms

Door opens only after several presses
Button seems to stay pressed or not click
Charging system warning light or message
Inconsistent opening depending on humidity or temperature
Door opens only with other controls

Common causes

Switch with dirty or worn internal contacts
Corroded connector adding resistance
Moisture or residue in the switch assembly
Wiring with degraded insulation
Door control unit misreading the signal

What to do

Check whether the switch moves smoothly and whether opening improves with other controls. It is not urgent for driving, but it is worth having it checked before the door ends up stuck shut.

How to read code P0CC8

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0CC8 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (C8) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0CC8 mean?

Charge port door: open request switch circuit performance. The control unit detected that the signal from the charge port door open switch is not behaving as expected, for example changing too slowly or staying in an abnormal state. The electrical circuit is present, but the signal is not reliable. It may be due to the switch, a degraded contact or the control unit.

Can I keep driving with code P0CC8 active?

With caution: limp mode possible, have it checked soon

Common causes — P0CC8

Switch with dirty or worn internal contacts Corroded connector adding resistance Moisture or residue in the switch assembly Wiring with degraded insulation Door control unit misreading the signal

How do you fix code P0CC8?

Check whether the switch moves smoothly and whether opening improves with other controls. It is not urgent for driving, but it is worth having it checked before the door ends up stuck shut.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes