P0CDA — Drive motor A position sensor: circuit C
| Meaning | The control unit detected a fault in circuit C of the sensor that measures the rotor position of drive motor A. This data is needed to drive the motor precisely. Which sensor is circuit C depends on the manufacturer, and I can't say without brand-specific data. |
| Family | Powertrain (P) |
Typical symptoms
Reduced power or limp mode
Jerky running or vibration under acceleration
Difficulty starting the drive system
Hybrid or EV system fault message
Common causes
Damaged sensor wiring or connector
Power supply or ground problem at the sensor
Fault in the inverter or motor control unit
Mechanical damage to the motor or sensor
What to do
How to read code P0CDA
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0CDA starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (DA) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0CDA mean?
Drive motor A position sensor: circuit C. The control unit detected a fault in circuit C of the sensor that measures the rotor position of drive motor A. This data is needed to drive the motor precisely. Which sensor is circuit C depends on the manufacturer, and I can't say without brand-specific data.
Can I keep driving with code P0CDA active?
With caution: limp mode possible, have it checked soon
Common causes — P0CDA
Faulty position sensor (resolver or similar) Damaged sensor wiring or connector Power supply or ground problem at the sensor Fault in the inverter or motor control unit Mechanical damage to the motor or sensor
How do you fix code P0CDA?
Have the associated codes and the live motor position data read. Then check the sensor connectors and wiring. If the vehicle goes into reduced power, drive carefully and have it checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0CD9 — Battery coolant temp sensor B: intermittent signal
- Next code: P0CDB — Motor A position sensor circuit C: implausible sig...
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open