Skip to content
Fault code dictionary (DTC)

P0CE9 — Hybrid/EV electronics coolant pump A: control circuit open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detected that the control circuit of pump A, which circulates coolant for the power electronics (inverter and converters), is open or not responding. It therefore cannot drive the pump. The electronics may overheat and the system may limit power.
FamilyPowertrain (P)

Typical symptoms

Warning light on
Reduced power or limp mode
Cooling fans very noisy or always running
Hybrid or EV system temperature gauge higher than normal
Drive system shutting down after prolonged effort

Common causes

Pump connector unplugged or corroded
Broken control wiring
Failed pump (motor or internal electronics)
Missing fuse or power supply in the circuit
Fault in the control unit that drives the pump

What to do

Check the fuse, connector and wiring of the pump, then have the command tested with the diagnostic tool. If the pump doesn't run, don't push with prolonged effort: the power electronics risk overheating. Have it checked soon.

How to read code P0CE9

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0CE9 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (E9) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0CE9 mean?

Hybrid/EV electronics coolant pump A: control circuit open. The control unit detected that the control circuit of pump A, which circulates coolant for the power electronics (inverter and converters), is open or not responding. It therefore cannot drive the pump. The electronics may overheat and the system may limit power.

Can I keep driving with code P0CE9 active?

With caution: limp mode possible, have it checked soon

Common causes — P0CE9

Pump connector unplugged or corroded Broken control wiring Failed pump (motor or internal electronics) Missing fuse or power supply in the circuit Fault in the control unit that drives the pump

How do you fix code P0CE9?

Check the fuse, connector and wiring of the pump, then have the command tested with the diagnostic tool. If the pump doesn't run, don't push with prolonged effort: the power electronics risk overheating. Have it checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes