Skip to content
Fault code dictionary (DTC)

P0CF3 — Charging control pilot circuit open

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control pilot is the communication wire between the charge port and the charging station or cable: it establishes whether charging can start and at what current. The control unit found it open or undetectable. Details depend on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Charging does not start
Charging error message on the dashboard
Malfunction or electrical system warning light on
Charging works with some stations and not others
Charge port light indicating a fault

Common causes

Control pilot pin or wire in the charge port damaged
Charge port connector dirty, corroded or wet
Broken wiring between the port and the onboard charger
Faulty charging cable or station
Faulty onboard charger or charge control unit

What to do

First try another station or cable, and check that the charge port is clean with no bent pins. If the problem persists, have the car checked, but it is usually not a fault that prevents driving.

How to read code P0CF3

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0CF3 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (F3) identify the specific fault inside that group.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0CF3 mean?

Charging control pilot circuit open. The control pilot is the communication wire between the charge port and the charging station or cable: it establishes whether charging can start and at what current. The control unit found it open or undetectable. Details depend on the manufacturer.

Can I keep driving with code P0CF3 active?

With caution: limp mode possible, have it checked soon

Common causes — P0CF3

Control pilot pin or wire in the charge port damaged Charge port connector dirty, corroded or wet Broken wiring between the port and the onboard charger Faulty charging cable or station Faulty onboard charger or charge control unit

How do you fix code P0CF3?

First try another station or cable, and check that the charge port is clean with no bent pins. If the problem persists, have the car checked, but it is usually not a fault that prevents driving.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes