P0CF8 — Control pilot charging switch A circuit open
| Meaning | The control unit does not detect the circuit of the switch that manages the charging control pilot signal, the wire the car and charger use to agree on charging. The circuit appears open or disconnected. The exact switch location depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Charging error message
Malfunction or electrical system warning light on
Car not responding when the cable is connected
Normal driving behavior
Common causes
Disconnected or corroded connector
Faulty charging switch or relay
Onboard charger with an internal fault
Faulty charge control unit
What to do
How to read code P0CF8
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0CF8 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make. The third character (C) points to hybrid propulsion, and the last two (F8) identify the specific fault inside that group.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0CF8 mean?
Control pilot charging switch A circuit open. The control unit does not detect the circuit of the switch that manages the charging control pilot signal, the wire the car and charger use to agree on charging. The circuit appears open or disconnected. The exact switch location depends on the manufacturer.
Can I keep driving with code P0CF8 active?
With caution: limp mode possible, have it checked soon
Common causes — P0CF8
Broken switch wiring Disconnected or corroded connector Faulty charging switch or relay Onboard charger with an internal fault Faulty charge control unit
How do you fix code P0CF8?
Try another cable and station to rule out external causes. If the car never responds to charging, have the wiring and connectors of the charging system checked.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0CF7 — Charging control pilot circuit intermittent/errati...
- Next code: P0CF9 — Control pilot charging switch A range/performance
Related codes
- P0C00 — Drive motor A current too low
- P0C01 — Drive motor A current too high
- P0C02 — Drive motor B current fault
- P0C03 — Drive motor B current too low
- P0C04 — Drive motor B current too high
- P0C05 — Motor A phase U-V-W circuit open
- P0C06 — Motor A phase U-V-W circuit low
- P0C07 — Motor A phase U-V-W circuit high
- P0C08 — Motor B phase U-V-W circuit open
- P0C09 — Motor B phase U-V-W circuit low
- P0C0A — Motor B phase U-V-W circuit high
- P0C0B — Motor A inverter power supply circuit open