Skip to content
Fault code dictionary (DTC)

P0D14 — Charging negative contactor control circuit high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control module detected a higher voltage than expected in the control circuit of the negative contactor (A) of the charging system. This usually means a short to supply voltage or a fault in the contactor driver. The contactor may not respond correctly to commands. The precise details depend on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Plug-in charging does not start or stops
Hybrid/electric system warning light on
Error message on the display
Possible reduced-power mode
Inconsistent charging behaviour

Common causes

Control wire shorted to the 12 V supply
Damaged connector or wiring
Contactor with a faulty internal coil
Fault in the driver circuit inside the module
Abnormal 12 V voltage from a weak battery or DC-DC converter

What to do

Avoid any work on the high-voltage system: this needs qualified staff. First check the 12 V battery and look for visible wiring damage without taking anything apart. Have the car checked soon.

How to read code P0D14

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D14 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D14 mean?

Charging negative contactor control circuit high. The control module detected a higher voltage than expected in the control circuit of the negative contactor (A) of the charging system. This usually means a short to supply voltage or a fault in the contactor driver. The contactor may not respond correctly to commands. The precise details depend on the manufacturer.

Can I keep driving with code P0D14 active?

With caution: limp mode possible, have it checked soon

Common causes — P0D14

Control wire shorted to the 12 V supply Damaged connector or wiring Contactor with a faulty internal coil Fault in the driver circuit inside the module Abnormal 12 V voltage from a weak battery or DC-DC converter

How do you fix code P0D14?

Avoid any work on the high-voltage system: this needs qualified staff. First check the 12 V battery and look for visible wiring damage without taking anything apart. Have the car checked soon.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes