P0D15 — Charging high-voltage interlock circuit open
| Meaning | The charging system uses a safety loop, called an interlock, that runs through the high-voltage connectors and confirms they are all closed. The control module found this circuit (A) broken. For safety it may block charging or the high-voltage system from switching on. The exact route of the loop depends on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Hybrid/electric warning light on
The car may not start in electric mode
Error message on the display
Limited power or limp mode
Common causes
Cover or high-voltage guard removed after previous work
Broken interlock wire
Damaged charger or charging port connector
Fault in the module reading the loop
What to do
How to read code P0D15
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0D15 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0D15 mean?
Charging high-voltage interlock circuit open. The charging system uses a safety loop, called an interlock, that runs through the high-voltage connectors and confirms they are all closed. The control module found this circuit (A) broken. For safety it may block charging or the high-voltage system from switching on. The exact route of the loop depends on the manufacturer.
Can I keep driving with code P0D15 active?
With caution: limp mode possible, have it checked soon
Common causes — P0D15
High-voltage connector not seated properly or damaged Cover or high-voltage guard removed after previous work Broken interlock wire Damaged charger or charging port connector Fault in the module reading the loop
How do you fix code P0D15?
Do not open or unplug anything orange: this needs qualified staff. If the car was recently in a workshop, mention that the code appeared after that work. Have it checked soon, because the interlock is a safety protection.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0D14 — Charging negative contactor control circuit high
- Next code: P0D16 — Charging high-voltage interlock circuit performanc...
Related codes
- P0D00 — Control Pilot ventilation switch circuit open
- P0D01 — Control Pilot ventilation switch signal out of range
- P0D02 — Control Pilot ventilation switch circuit low
- P0D03 — Control Pilot ventilation switch circuit high
- P0D04 — Control Pilot ventilation switch intermittent or erratic
- P0D05 — Control Pilot ventilation switch stuck off
- P0D06 — Control Pilot ventilation switch stuck on
- P0D07 — Charging system positive contactor A circuit fault
- P0D08 — Charging positive contactor A stuck closed
- P0D09 — Charging positive contactor A stuck open
- P0D0A — Charging positive contactor A control circuit open
- P0D0B — Charging positive contactor A control circuit out of range