P0D22 — Battery charger A output current performance
| Meaning | The control module detected that the current delivered by the on-board charger (A) to the traction battery does not match what was requested, for example too low or unstable. The charger works but does not follow the command. Details depend on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Charging that stops at times
Hybrid/electric warning light on
Error message on the display
Charging time varying from one session to another
Common causes
Faulty current sensor
Power wiring with imperfect contacts
Unstable mains or a faulty charging cable
Communication problem with the battery management
What to do
How to read code P0D22
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0D22 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0D22 mean?
Battery charger A output current performance. The control module detected that the current delivered by the on-board charger (A) to the traction battery does not match what was requested, for example too low or unstable. The charger works but does not follow the command. Details depend on the manufacturer.
Can I keep driving with code P0D22 active?
With caution: limp mode possible, have it checked soon
Common causes — P0D22
Degraded internal charger components Faulty current sensor Power wiring with imperfect contacts Unstable mains or a faulty charging cable Communication problem with the battery management
How do you fix code P0D22?
Try another cable and another socket or charging point. Do not touch orange components. Have the charging system checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0D21 — Battery charger A output voltage too low
- Next code: P0D23 — Battery charger A output shorted
Related codes
- P0D00 — Control Pilot ventilation switch circuit open
- P0D01 — Control Pilot ventilation switch signal out of range
- P0D02 — Control Pilot ventilation switch circuit low
- P0D03 — Control Pilot ventilation switch circuit high
- P0D04 — Control Pilot ventilation switch intermittent or erratic
- P0D05 — Control Pilot ventilation switch stuck off
- P0D06 — Control Pilot ventilation switch stuck on
- P0D07 — Charging system positive contactor A circuit fault
- P0D08 — Charging positive contactor A stuck closed
- P0D09 — Charging positive contactor A stuck open
- P0D0A — Charging positive contactor A control circuit open
- P0D0B — Charging positive contactor A control circuit out of range