Skip to content
Fault code dictionary (DTC)

P0D23 — Battery charger A output shorted

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control module detected a short circuit on the output of the on-board charger (A), the side that feeds the traction battery. For protection the charger shuts down and charging stops. A short on the high-voltage side is serious. Details depend on the manufacturer.
FamilyPowertrain (P)

Typical symptoms

Charging stops immediately or does not start
Hybrid/electric warning light on
Error message on the display
Possible protections or fuses tripping
Possible burning smell in severe cases

Common causes

On-board charger with an internal fault
Damaged or crushed high-voltage wiring
Water or moisture in the connectors
Fault in the link circuit to the battery
Faulty detection sensor

What to do

Stop charging and do not retry repeatedly. Do not touch orange cables or components. Have the car checked immediately by qualified staff; if you smell burning or see smoke, move away from the car.

How to read code P0D23

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D23 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D23 mean?

Battery charger A output shorted. The control module detected a short circuit on the output of the on-board charger (A), the side that feeds the traction battery. For protection the charger shuts down and charging stops. A short on the high-voltage side is serious. Details depend on the manufacturer.

Can I keep driving with code P0D23 active?

With caution: limp mode possible, have it checked soon

Common causes — P0D23

On-board charger with an internal fault Damaged or crushed high-voltage wiring Water or moisture in the connectors Fault in the link circuit to the battery Faulty detection sensor

How do you fix code P0D23?

Stop charging and do not retry repeatedly. Do not touch orange cables or components. Have the car checked immediately by qualified staff; if you smell burning or see smoke, move away from the car.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes