P0D24 — Battery charger A temperature too high
| Meaning | The control module detected that the on-board charger (A) is hotter than the allowed limit. To protect itself the charger may reduce current or stop charging. It can be due to outside heat or poor cooling. Details depend on the manufacturer. |
| Family | Powertrain (P) |
Typical symptoms
Hybrid/electric warning light on
High temperature message
Noisy cooling fans or pump
Problem more frequent in summer or on long charges
Common causes
Reduced charger cooling (low coolant, pump, fan)
Blocked air intakes
Charger with degraded internal components
Faulty temperature sensor
What to do
How to read code P0D24
This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.
The code P0D24 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.
How to proceed, in order
- Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
- Check connectors, wiring and grounds of the component involved, and the battery voltage.
- Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
- After the repair, clear the code and confirm with a road test that it does not come back.
Frequently asked questions
What does code P0D24 mean?
Battery charger A temperature too high. The control module detected that the on-board charger (A) is hotter than the allowed limit. To protect itself the charger may reduce current or stop charging. It can be due to outside heat or poor cooling. Details depend on the manufacturer.
Can I keep driving with code P0D24 active?
With caution: limp mode possible, have it checked soon
Common causes — P0D24
Strong outside heat or car parked in the sun Reduced charger cooling (low coolant, pump, fan) Blocked air intakes Charger with degraded internal components Faulty temperature sensor
How do you fix code P0D24?
Let the car cool down, charge in the shade and retry at a lower current. Do not open orange parts. If the code returns, have the cooling checked soon.
We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.
Write to us on WhatsApp Contact us- Previous code: P0D23 — Battery charger A output shorted
- Next code: P0D25 — Charging system precharge time too short
Related codes
- P0D00 — Control Pilot ventilation switch circuit open
- P0D01 — Control Pilot ventilation switch signal out of range
- P0D02 — Control Pilot ventilation switch circuit low
- P0D03 — Control Pilot ventilation switch circuit high
- P0D04 — Control Pilot ventilation switch intermittent or erratic
- P0D05 — Control Pilot ventilation switch stuck off
- P0D06 — Control Pilot ventilation switch stuck on
- P0D07 — Charging system positive contactor A circuit fault
- P0D08 — Charging positive contactor A stuck closed
- P0D09 — Charging positive contactor A stuck open
- P0D0A — Charging positive contactor A control circuit open
- P0D0B — Charging positive contactor A control circuit out of range