Skip to content
Fault code dictionary (DTC)

P0D4D — Charger output voltage sensor to hybrid/EV battery: implausible reading

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit read a value from the sensor measuring output voltage toward the traction battery that does not match what was expected or the voltage measured by the battery management system. The signal arrives, but it is not believable. It may come from the sensor, the wiring or a problem in the charger.
FamilyPowertrain (P)

Typical symptoms

Warning light or hybrid/EV system error message
Charging starts and then stops
Charging slower than normal
Displayed state of charge not reliable
Charging stops before completion

Common causes

High resistance in a connector or in the high-voltage wiring
Voltage sensor reading inaccurately
Mismatch between the charger's measurement and the battery management's
Internal fault in the charger module
Traction battery problem skewing the voltage

What to do

Try charging from another station and note whether the problem repeats. Do not open or touch high-voltage components. Have it diagnosed with live data at a workshop approved for hybrid/EV vehicles, and do not wait too long if charging does not complete.

How to read code P0D4D

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D4D starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D4D mean?

Charger output voltage sensor to hybrid/EV battery: implausible reading. The control unit read a value from the sensor measuring output voltage toward the traction battery that does not match what was expected or the voltage measured by the battery management system. The signal arrives, but it is not believable. It may come from the sensor, the wiring or a problem in the charger.

Can I keep driving with code P0D4D active?

With caution: limp mode possible, have it checked soon

Common causes — P0D4D

High resistance in a connector or in the high-voltage wiring Voltage sensor reading inaccurately Mismatch between the charger's measurement and the battery management's Internal fault in the charger module Traction battery problem skewing the voltage

How do you fix code P0D4D?

Try charging from another station and note whether the problem repeats. Do not open or touch high-voltage components. Have it diagnosed with live data at a workshop approved for hybrid/EV vehicles, and do not wait too long if charging does not complete.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes