Skip to content
Fault code dictionary (DTC)

P0D57 — Proximity detection (charge inlet), circuit A implausible

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe signal from the circuit that detects the charging plug is present, but doesn't match what the control unit expects. This can happen with dirty contacts or abnormal resistance in the circuit. The system can't tell for sure whether or how the cable is connected.
FamilyPowertrain (P)

Typical symptoms

Charging won't start or starts with difficulty
Reduced-current charging
Warning light on
Error message when connecting the cable
Different behaviour with different cables or stations

Common causes

Dirty or corroded inlet contacts
Charging cable with abnormal resistance
Wiring with high resistance or poorly seated connector
Faulty detection sensor or circuit
Charger module fault

What to do

Try another cable and check the cleanliness and condition of the inlet contacts. If the code returns, the circuit needs a proper diagnosis. It doesn't affect driving, only charging.

How to read code P0D57

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D57 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D57 mean?

Proximity detection (charge inlet), circuit A implausible. The signal from the circuit that detects the charging plug is present, but doesn't match what the control unit expects. This can happen with dirty contacts or abnormal resistance in the circuit. The system can't tell for sure whether or how the cable is connected.

Can I keep driving with code P0D57 active?

With caution: limp mode possible, have it checked soon

Common causes — P0D57

Dirty or corroded inlet contacts Charging cable with abnormal resistance Wiring with high resistance or poorly seated connector Faulty detection sensor or circuit Charger module fault

How do you fix code P0D57?

Try another cable and check the cleanliness and condition of the inlet contacts. If the code returns, the circuit needs a proper diagnosis. It doesn't affect driving, only charging.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes