Skip to content
Fault code dictionary (DTC)

P0D58 — Proximity detection (charge inlet), circuit A signal low

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detects too low a signal in the circuit that recognises the charging plug. This often points to a short to ground or too little resistance in the circuit. The system may fail to recognise the cable properly and refuse to charge.
FamilyPowertrain (P)

Typical symptoms

Charging won't start
Car doesn't recognise the cable
Warning light on
Error message when connecting
Plug stays locked or doesn't lock

Common causes

Short to ground in the inlet wiring
Water or moisture in the inlet
Damaged inlet contacts
Faulty charging cable
Charger module fault

What to do

Check that the inlet is dry and clean and try another cable. If the code stays, have the inlet wiring checked. Driving isn't compromised, charging is.

How to read code P0D58

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D58 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D58 mean?

Proximity detection (charge inlet), circuit A signal low. The control unit detects too low a signal in the circuit that recognises the charging plug. This often points to a short to ground or too little resistance in the circuit. The system may fail to recognise the cable properly and refuse to charge.

Can I keep driving with code P0D58 active?

With caution: limp mode possible, have it checked soon

Common causes — P0D58

Short to ground in the inlet wiring Water or moisture in the inlet Damaged inlet contacts Faulty charging cable Charger module fault

How do you fix code P0D58?

Check that the inlet is dry and clean and try another cable. If the code stays, have the inlet wiring checked. Driving isn't compromised, charging is.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes