Skip to content
Fault code dictionary (DTC)

P0D59 — Proximity detection (charge inlet), circuit A signal high

Severity: Warning Can you drive? With caution: limp mode possible, have it checked soon Make: All makes (OBD-II standard)
MeaningThe control unit detects too high a signal in the circuit that recognises the charging plug. This often means an open circuit, poor contact or a short to supply. The system may not see the cable even when it is plugged in.
FamilyPowertrain (P)

Typical symptoms

Charging won't start with the cable plugged in
Car seems not to see the plug
Warning light on
Error message when connecting
Charging possible only with certain cables or stations

Common causes

Broken wire or disconnected connector in the inlet circuit
Corroded or damaged inlet contacts
Short to supply voltage
Faulty charging cable
Charger module fault

What to do

Try another cable and visually check the inlet. If the code stays, have the wiring and connectors checked. It doesn't prevent driving, only charging.

How to read code P0D59

This is a warning: the vehicle usually keeps working, but the control unit may limit performance (limp mode) until the fault is removed.

The code P0D59 starts with P: it belongs to the powertrain (engine and transmission) area. It is defined by the SAE/ISO standard, so it means the same on every make.

How to proceed, in order

  1. Read the code with the diagnostic tool and note the freeze-frame data and any other stored codes.
  2. Check connectors, wiring and grounds of the component involved, and the battery voltage.
  3. Measure the real values of the component with the diagnostic tool instead of replacing it by guesswork.
  4. After the repair, clear the code and confirm with a road test that it does not come back.

Frequently asked questions

What does code P0D59 mean?

Proximity detection (charge inlet), circuit A signal high. The control unit detects too high a signal in the circuit that recognises the charging plug. This often means an open circuit, poor contact or a short to supply. The system may not see the cable even when it is plugged in.

Can I keep driving with code P0D59 active?

With caution: limp mode possible, have it checked soon

Common causes — P0D59

Broken wire or disconnected connector in the inlet circuit Corroded or damaged inlet contacts Short to supply voltage Faulty charging cable Charger module fault

How do you fix code P0D59?

Try another cable and visually check the inlet. If the code stays, have the wiring and connectors checked. It doesn't prevent driving, only charging.

Need help with this fault?

We are ECU specialists: diagnosis, file repair and remapping for cars, bikes, trucks and agricultural vehicles.

Write to us on WhatsApp Contact us
Where to get it fixed

Related codes